Turn Professional 3D Scanning Into Automated Inspection
The SCANOLOGY AM-DESK is a compact automated 3D measurement station designed to bring robotic 3D inspection directly to the production floor, quality lab, or manufacturing cell.
AM-DESK combines a programmable turntable, intelligent control system, servo mechanisms, safety systems, motion control, collaborative robotics, professional 3D scanning and automated inspection software into one flexible platform.
Pair AM-DESK with compatible SCANOLOGY 3D scanners and collaborative robots to automate repetitive inspection of castings, molded parts, machined components, stamping parts and other manufactured products.
AM-DESK allows manufacturers to automate repetitive 3D scanning and inspection without requiring a large traditional metrology cell. Preset inspection programs can control the robot, scanner, turntable and measurement workflow while reducing operator involvement.
Preset measurement programs allow operators to start complex robotic scanning routines without manually scanning every component.
The AM-DESK 60120 supports automatic scanner calibration to help maintain measurement performance during demanding production use.
Bring automated dimensional inspection onto the production floor without installing a large traditional metrology cell.
AM-DESK supports multiple collaborative robot platforms, allowing the system to be configured around specific automation requirements.
The full AM-DESK 60120 can work with additional plug-and-play positioners to expand the measurement workspace and part access.
Scan data can be compared against nominal CAD geometry and used to generate repeatable dimensional inspection results.
A compatible SCANOLOGY scanner can be mounted directly to the collaborative robot so AM-DESK can automatically move the scanner around the component.
This approach is particularly useful when manufacturers need to inspect the same part repeatedly or process multiple part types through predefined inspection programs.
Place the component on the AM-DESK turntable, fixture or supported positioning system.
Choose the predefined inspection routine for the part being measured.
The robot and positioner automatically move through the required measurement positions.
Process the 3D data, compare against CAD and generate inspection results for quality control.
AM-DESK can automate the capture of complex surfaces that would otherwise require an operator to reposition both the scanner and the component manually.
The programmable turntable and robot allow the scanner to reach different orientations while maintaining a consistent inspection routine.
AM-DESK is designed to reduce many of the installation requirements associated with traditional automated metrology cells.
The full station weighs approximately 75 kg, occupies roughly one square meter, and can be installed in approximately five minutes with standard 110–220 V power.
Mounted on a suitable mobile cart or workstation, the system can be relocated where automated inspection is needed.
AM-DESK can be paired with different SCANOLOGY 3D scanning systems, allowing the automation cell to be configured for different part sizes, tolerances and inspection applications.
Depending on the application, AM-DESK can be configured with a compatible handheld or tracking 3D scanner.
Rapid Scan 3D can help evaluate:
Choose between the full-featured AM-DESK 60120 and the lighter AM-DESK Lite depending on payload, positioner and calibration requirements.
Designed for more demanding automated inspection and larger turntable payloads.
Lower-weight configuration for compact automated measurement applications.
SCANOLOGY's current AM-DESK platform supports a range of collaborative robot systems, allowing manufacturers to select a robotic platform that fits their production and integration requirements.
Supports compatible Elite Robots including CS66, EC66 and EA66 configurations.
Supports compatible Universal Robots configurations including UR5.
Supports the compatible FAIRINO FR5 collaborative robot platform.
Supports compatible AUBO systems including the AUBO i5.
Supports compatible JAKA systems including the ZU5.
SCANOLOGY also lists Han's E05-L and EFORT ECR5 among supported robot platforms.
Changes in temperature, extended production use and equipment conditions can influence precision measurement systems.
AM-DESK 60120 can automatically calibrate the scanner after a measurement session or when operating conditions change, helping support continuous automated inspection.
The built-in servo-controlled turntable rotates components into the positions needed for automatic 3D measurement.
The AM-DESK 60120 supports a payload up to 125 kg and a maximum rotational speed of 50 degrees per second.
Combining robot motion and turntable motion allows the system to capture difficult surfaces while minimizing manual repositioning.
AM-DESK is CE marked and incorporates multiple safety features for automated operation. Safety capabilities depend on the specific robot and final system configuration.
Integrated emergency-stop controls allow operators to quickly stop the system when required.
Warning indicators can provide visual and audible notification of system status and potential hazards.
Compatible collaborative robots can add collision detection and additional safety functionality to the automated cell.
Current AM-DESK systems use SCANOLOGY's DefinSight-Automation software platform to coordinate automated scanning, robotic motion, calibration and data-processing workflows.
Coordinate robot motion and scanner acquisition using predefined automated measurement programs.
Support automatic scanner calibration as part of the production measurement workflow on compatible configurations.
Automate data capture and processing to streamline downstream inspection and reporting.
Connect automated measurement workflows with PLC-based production equipment and control systems.
Open interfaces can support integration with manufacturing execution systems and higher-level production software.
Configure advanced measurement programs while giving production operators simplified controls for routine inspection.
Automate inspection of castings, stampings, plastic components, powertrain parts and manufactured assemblies.
Automate repeatable dimensional inspection of precision components, tooling and manufactured aerospace parts.
Inspect machined components against CAD to identify dimensional deviations and production issues.
Capture full-field 3D data from cast components for dimensional inspection and process control.
Automate inspection of stamped components, formed panels and fabricated sheet-metal parts.
Inspect molded components and production parts for dimensional variation and manufacturing consistency.
Measure fixtures, tooling and production equipment for wear, verification and maintenance.
Run repeatable automated inspection routines for high-mix or higher-volume manufacturing workflows.
| Specification | AM-DESK 60120 | AM-DESK Lite |
|---|---|---|
| System Type | Automated 3D measurement station | Compact automated 3D measurement station |
| Dimensions | 1200 × 600 × 177 mm | 1200 × 600 × 180 mm |
| Approx. Inches | 47.2 × 23.6 × 7.0 in | 47.2 × 23.6 × 7.1 in |
| Weight | 75 kg / 165.3 lb | 70 kg / 154.3 lb |
| Turntable Payload | ≤125 kg / 275.6 lb | ≤75 kg / 165.3 lb |
| Maximum Turntable Speed | 50°/s | 40°/s |
| Communication Interface | TCP/IP | TCP/IP |
| Robot Support | UR5, AUBO i5, JAKA ZU5, Han's E05-L, Elite CS66 / EC66 / EA66, EFORT ECR5, FAIR FR5 and compatible configurations | |
| Multiple Positioner Support | Supported | Not supported |
| Fully Automated Calibration | Supported | Not supported |
| Power Supply | 110–220 V / 50–60 Hz | 220 VAC / 50–60 Hz |
| Peak Power | 900 W | 700 W |
| Approximate Footprint | Approximately 1 m² depending on system configuration | |
| Software | SCANOLOGY DefinSight-Automation | |
| Scanner Compatibility | Compatible SCANOLOGY industrial 3D scanning systems | |
| Installation | Designed for quick installation and relocation | |
Specifications are based on current SCANOLOGY manufacturer information and may change without notice. Robot and scanner compatibility, payload limits, safety configuration and automation capabilities depend on the final system configuration. Contact Rapid Scan 3D to confirm the current AM-DESK configuration for your application.
Rapid Scan 3D can help integrate the complete automated inspection workflow—including 3D scanning hardware, collaborative robots, inspection software, training and implementation.
We'll evaluate your components, production volume, cycle-time goals, tolerances and inspection requirements before recommending a system.
Rapid Scan 3D can help configure AM-DESK around compatible SCANOLOGY scanners and collaborative robot platforms.
Get assistance with robotic scanning, automation software, inspection workflows and ongoing technical support.
AM-DESK is a compact automated 3D measurement station that combines robotics, 3D scanning, motion control, a programmable turntable and automated inspection software.
AM-DESK 60120 supports a larger turntable payload, higher turntable speed, multiple positioners and fully automated scanner calibration. AM-DESK Lite is a lighter, more compact configuration with a lower payload and simplified automation capabilities.
The current AM-DESK 60120 is rated for a turntable payload up to 125 kg. AM-DESK Lite is rated up to 75 kg.
AM-DESK 60120 measures approximately 1200 × 600 × 177 mm and weighs approximately 75 kg.
SCANOLOGY currently lists compatibility with UR5, AUBO i5, JAKA ZU5, Han's E05-L, Elite CS66/EC66/EA66, EFORT ECR5 and FAIR FR5 configurations.
Yes. SCANOLOGY currently lists the Elite CS66, EC66 and EA66 among the supported robot configurations for AM-DESK.
Yes. SCANOLOGY currently lists the FAIR FR5 as a supported AM-DESK robot configuration.
AM-DESK can be configured with compatible SCANOLOGY 3D scanning systems. The best scanner depends on part size, accuracy, surface characteristics and inspection requirements.
AM-DESK 60120 supports fully automated scanner calibration. AM-DESK Lite does not support full automatic calibration.
Yes. Automated measurement data can be compared with CAD geometry and incorporated into dimensional inspection and reporting workflows.
Current AM-DESK systems use SCANOLOGY DefinSight-Automation for automated scanning, calibration, data processing and robot control.
SCANOLOGY states that the compact station can be set up in approximately five minutes depending on final configuration and site requirements.
Yes. Its compact design allows AM-DESK to be mounted on a suitable mobile platform for relocation within a production environment.
Yes. Repeatable inspection programs make AM-DESK suitable for automated measurement of multiple parts and production inspection workflows.
Contact Rapid Scan 3D for current AM-DESK 60120 and AM-DESK Lite pricing, robot and scanner configurations, demonstrations, integration and training.
Tell Rapid Scan 3D what parts you need to inspect, your production volume, tolerance requirements and desired cycle time. We'll help configure an AM-DESK automated 3D measurement solution around your application.
Rapid Scan 3D
562-912-3544
|
info@rapidscan3d.com
| Technical Specifications AM Desk | |
|---|---|
| Type | AM-DESK 60120 |
| Dimension | 1200 x 600 x 177 mm |
| Weight | 75 KG |
| Turntable Payload | 140 KG |
| Turntable Repeatability | 0.05° |
| Turntable Accuracy | 0.1° |
| Max Rotational Speed of Turntable | 50°/S |
| Communication Interface | TCP/IP |
| Robot Supported | Universal Robots / AUBO/i5; i7 |
| Power Supply | 110 V–220 V/50–60 Hz |
| Peak Power | 900 W |
